
에 대한 ADSS cable drum bolt protrusion protection, define the purchasing and acceptance boundary. Include exposed drum bolt ends in the shipping review for an ADSS cable order. Ask the drum supplier and responsible logistics team to identify any protrusions and the protection actually proposed. A photograph of a fully wound reel may conceal the outside hardware. This guide concerns the supplied drum and packing evidence; it provides no instruction to alter structural drum hardware or calculate a universal allowable protrusion.
Identify the actual drum construction
Connect the drum reference, cable length and packing revision to the proposed shipment. Ask for the views needed to identify outside hardware on both flanges. Keep the drum supplier identity where it forms part of the accepted supply record. An illustration of ADSS cable construction does not establish the drum hardware or show how the reel will interact with adjacent freight during transport.

Describe the observed protrusion
Ask the responsible reviewer to identify the location and condition of any exposed bolt end in the actual drum or approved sample. Retain photographs with a clear reference to the drum. Avoid inferring dimensions from an unscaled image. The reviewer should distinguish a confirmed observation from a concern requiring inspection, then decide whether the proposed protection is appropriate for the actual handling and packing arrangement.
Keep protection separate from structural changes
Ask which protective item is included and who confirms its fit and retention in the shipping plan. Do not assume that shortening, removing or replacing a bolt is an acceptable remedy. Any change affecting the drum belongs to its responsible designer or supplier. Procurement should preserve the approved protection scope and unresolved questions rather than converting a packing concern into an unreviewed hardware alteration.

Check the shipping evidence against the order
Retain the accepted packing plan and the actual pre-dispatch views required by the buyer. Connect them to the drum and cable identities. Include destination, ordered length, quantity and handling constraints in the inquiry. Record any packing deviation and its disposition before release. This provides a defined supply check without claiming that a protected bolt proves the drum or cable has passed every transport requirement.
Compare the proposed supply and its evidence
| 구매자 필요 | 추천상품 | 주요 사양 | 왜 중요한가요? |
|---|---|---|---|
| drum and cable packing identity | Identified project cable configuration | 주문별 범위 및 담당 검토자 | 구매 중인 항목에 기록을 연결합니다. |
| exposed hardware observations | Identified project cable configuration | 주문별 범위 및 담당 검토자 | 중요한 비교 조건을 표시합니다. |
| approved protection scope | Identified project cable configuration | 주문별 범위 및 담당 검토자 | 관찰과 가정을 분리합니다. |
| pre-dispatch evidence and disposition | Identified project cable configuration | 주문별 범위 및 담당 검토자 | 수락된 배송 결정을 유지합니다. |
정의된 산업 프로젝트에 가장 적합
식별된 프로젝트 케이블 주문을 준비하는 엔지니어링 팀, 산업 구매 관리자 및 유통업체에 가장 적합합니다. 문서화된 애플리케이션, 수량, 기술 소유자 및 승인 절차가 있는 프로젝트에 적합합니다. 카탈로그 이미지에서 범용 장비 기능, 고정된 상업 용어 또는 확인된 주문 결과를 추론하는 데 적합하지 않습니다. 생산 공급을 승인하기 전에 제공된 구성과 프로젝트별 증거를 확인하세요.
Buyer questions before requesting a quotation
What information should accompany the first RFQ?
Describe the application, destination, proposed configuration, quantity and target delivery date. Include the drum and cable packing identity and identify the person who owns technical approval. Send the relevant drawings, process information or specification revision when available. Ask the supplier to return a proposal that distinguishes confirmed requirements from assumptions, exclusions and options, so the industrial purchase can be reviewed against a clear scope.
일반 카탈로그에 이러한 승인 요구 사항이 설정되어 있습니까?
A general catalog provides product context and can help identify the family to discuss. It does not establish the exposed hardware observations for the actual order. Ask the supplier to confirm the proposed arrangement and the evidence that will accompany it. Keep product identity, a requested feature, a completed demonstration and the final acceptance decision separate when assessing whether the requirement has been met.
구매자는 어떤 서류를 보관해야 합니까?
Retain the accepted technical offer, applicable configuration and revision identities, relevant inspection records and the delivery disposition. Preserve the approved protection scope together with any deviation and its review. The useful record connects an observation with the actual supplied item and requirement. An unrelated brochure, image or unconfirmed numerical claim should not replace the evidence specifically required for the project purchase.
문서와 공급 범위를 맞춤 설정할 수 있나요?
Submit the requested documentation, packaging, identification or other supply change with the inquiry. Include the pre-dispatch evidence and disposition and explain the intended use. Ask OWIRE to confirm feasibility, quantity conditions and the effect on price or delivery in the actual proposal. Keep the agreed revision with the order rather than assuming that every requested customization is standard or already included.
기술 승인 및 납품 일정은 어떻게 정해야 합니까?
Close the technical scope, approval owner and outstanding questions before requesting a firm production commitment. Include the drum and cable packing identity, required quantity, destination and target arrival date. Distinguish document review, any agreed evaluation, production completion and transportation. This guide establishes no inventory position, minimum order or fixed lead time; the supplier must confirm those commercial conditions for the actual configuration and project.
이 리뷰를 전체 프로젝트 사양에 연결하세요.
가격 비교를 요청하기 전에 의도한 프로젝트 환경과 정확한 케이블 또는 어셈블리 사양을 명시하십시오. 도체 또는 광섬유 식별, 구조, 재킷, 관련 차폐, 주문 길이, 커넥터 조합 및 포장을 포함합니다. 제안된 구성에 어떤 제품 및 테스트 기록이 적용되는지 물어보십시오. 케이블 제품군 사진은 논의할 내용을 식별하는 데 도움이 되지만 주문 길이, 화재 분류, 광학 결과 또는 선적의 전기적 성능을 입증하지는 않습니다. 이러한 요구 사항을 실제 문서 및 승인 절차와 연계하여 유지하십시오. 수량, 목적지, 개인 상표 요구 사항 및 대상 배송 순서를 제공합니다. 시공, 절단 일정 또는 표시가 변경된 경우 구매 주문서와 함께 승인된 수정본을 보존하십시오. 여기서 논의된 물류 및 문서화 경계는 프로젝트 기술 사양과 함께 해당 공급 결정을 지원하며 이를 대체하지 않습니다.
식별된 산업 공급 문의 보내기
For a quotation, provide the application, project country, required quantity, technical specifications, relevant drawings, testing requirements, packaging or OEM needs and target delivery schedule. Identify the unresolved acceptance questions and the person responsible for reviewing the proposal. Contact OWIRE with the project details to request an actual technical and commercial offer. Keep a proposed value clearly labeled until it is confirmed for the supplied configuration.









