• 운영자 협력
  • 문의하기

Cable Structure

Cable Structure

Loading categories...

마지막 링크 직접 매설, 도관 지하 또는 자립 공중선용 FTTx 플랫 드롭 유연한 광섬유 케이블

figure fig 8 outdoor areial overhead handing PSP/APL armored anti rodent messenger fiber optic cable GYXTC8A

The fibers,  250μm , are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.

 

figure fig 8 outdoor areial overhead handing PSP/APL armored anti rodent messenger fiber optic cable GYXTC8S

The fibers,  250μm , are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.

 

공중 덕트 공기로 불어 매장된 교수형 극 장착 야외 광섬유 케이블 GYTA

  1. Precise control of the excess length of the optical fiber ensures that the optical cable has good tensile performance and temperature characteristics
  2. PBT loose tube material has good hydrolysis resistance, and the tube is filled with special grease to protect the optical fiber
  3. PE sheath has good resistance to solar radiation
  4. Smooth outer sheath enables the optical cable to have a smaller coefficient of friction during installation
  5. The following measures are taken to ensure the waterproof performance of the optical cable: special waterproof compound is filled in the loose tube; completely filled with the cable core; aluminum-plastic composite with moisture-proof layer
  6. The side pressure index of aluminum belt is not as good as that of steel belt, but the moisture-proof and rust-proof effect is better than that of steel belt. GYTA has a long life when used in pipes.

Applicable

  1. Aerial laying
  2. Wear tube/blowing in tube

Fig8 Central Loose Tube FTTH Fiber Optic Fiber Cable GYXTC8Y-2/4/6/8/12B1.3

1. Accurate optical fiber excess length ensures good mechanical and temperature performance.,
2. High strength loose tube that is hydrolysis resistant and special tube filling compound and flexibility.
3. Figure 8 self supporting type structure possesses high tensile strength and is convenient for aerial installation and its installation cost is cheap.
4. The service life of the products willbe more 30 years.
5. Light, flexible, easy for the laying and it is used for FTTH solution.

장갑형, 설치류 방지용, 덕트 및 공중선, 직접 매립형 실외 광섬유 케이블(2-144Core) GYTS

Features:

• Steel wire strength.filler protect tube fiber.steel tape armord.
• Good ultra violet radiation resistant property.
• Good moisture-resistance.

신청:

• Adopted to Outdoor distribution.
• Suitable for aerial, Duct and Hanging, Direct Buried method.
• Long-distance communication, interoffice communication,duct laying,non-self supporting aerial

 

Figure Fig 8 Armoured Anti Rodent  Steel Wire Tight Buffer Messeger Hanging Single Mode Multimode Overhead Fiber Optic Cable

 

 

Figure Fig 8 Tight Buffer Messeger Hanging Single Mode Multimode Overhead Fiber Optic Cable

Fiber:
1-12fibers
900µm tight buffer

Strength Member:
Steel wire

 

Cable Structure

지금 연락하세요

유형
어떻게 연락받고 싶나요?
* 우리는 귀하의 개인 정보를 존중합니다. 귀하가 연락처 정보를 제출하면 당사는 당사의 규정에 따라서만 귀하에게 연락하는 데 동의합니다. 개인 정보 보호 정책.