ชุดเริ่มต้น
  • บ้าน
  • ความร่วมมือของผู้ปฏิบัติงาน
  • ติดต่อเรา
.play_icon_video{จอแสดงผล:ไม่มี;}
Owire Category 5e S/UTP Patch Cord

Utp Ethernet Cat5e 24Awg Patch Cord Awg Cat5 Rj45 Networking Cat 5E

*Voltage rating: 125VCA RMS *Current rating: 1.5Amp *Contact resistance: 100 MILLIOHMS MAX *Insulation Resistance:1000 MEGOHMS MIN@500VDC *Dielectric strength: 750 VAC RMS, 60Hz 1min

คุณสมบัติ

Owire Category 5e S/UTP Patch Cord

ข้อมูลจำเพาะหลัก

Cable
CAT5E UTP or FTP or SFTP cable
Jacket
PVC/LSZH jacket
   
Wire
4*2*AWG24/26, Twisted Pair
   
Plug
RJ45 Gold plating from FU” to 50U”
   
Transmission
It supports data transmission to 100MHz
   

คำถามที่พบบ่อย

ใช่ เราคือผู้ผลิตตัวจริงที่มีพนักงานมากกว่า 500 คน

ใช่ มีคำสั่งซื้อขนาดเล็ก เราสนับสนุนโครงการใหม่ของลูกค้าของเรา เนื่องจากเรารู้ว่าธุรกิจมักจะมาจากคำสั่งซื้อขนาดเล็ก

10 ปีสำหรับสาย Lan, 25 ปีสำหรับสายไฟเบอร์ออปติก

โดยปกติภายใน 10-15 วันทำการ

สาย Lan ผลผลิตประจำปีของเราคือ 500000 * 305 ม
สายเคเบิลไฟเบอร์ออปติกกลางแจ้ง/ในร่ม ผลผลิตประจำปีของเราคือ 8,000,000 KM;
FTTH/FTTX/FTTA Cable มีระยะทาง 6,000,000 KM ต่อปี
Patch Cord/Pigtails มีจำนวน 12,400,000 ชิ้นต่อปี

ใช่ เราจัดหาบริการ OEM และ ODM คุณสามารถส่งรูปวาดของคุณมาให้เราหรือเราจะออกแบบโดยทีมงานมืออาชีพของเรา

สินค้าที่เกี่ยวข้อง

การปิดประกบด้วยแสงใช้เพื่อกระจาย ประกบ และจัดเก็บสายแสงกลางแจ้งที่เข้าและออกจากปลายของการปิด มีวิธีการเชื่อมต่อสองวิธี: การเชื่อมต่อโดยตรงและการเชื่อมต่อแบบแยก ใช้ได้กับสถานการณ์ต่างๆ เช่น เหนือศีรษะ หลุมคนในท่อ สถานการณ์ฝังตัว ฯลฯ เมื่อเปรียบเทียบกับกล่องเทอร์มินัล การปิดต้องใช้ข้อกำหนดในการปิดผนึกที่เข้มงวดกว่ามาก
The AAAC is used for overhead power transmission lines , especially the electric power augmentation of old transmission lines.
The 250μm fibers are positioned in a loose tube made of a high modulus plastic.The tubes are filled with a water-resistant filling compound.A steel wire,sometimes sheathed by polyethylene (PE)for cable with high fiber count,locates in the center of core as a metallic strength member.Tubes and possible fillers are stranded around the strength member into a compact and circular cable core.Aluminum tape is applied around the cable core,which is filled with the filling compound to protect it from water ingress.Then,the cable is sheathed by PE material as inner sheath.After wrapping of steel braiding,Finally,the cable is sheathed by PE sheath as outer sheath.

หากคุณมีความสนใจในโซลูชั่นอุตสาหกรรมของเรา

โปรดติดต่อเราและเราพร้อมให้บริการคุณ
ประเภท

* เราเคารพความเป็นส่วนตัวของคุณ เมื่อคุณส่งข้อมูลการติดต่อของคุณ เราตกลงที่จะติดต่อคุณตามที่เราระบุไว้เท่านั้น นโยบายความเป็นส่วนตัว.

ติดต่อตอนนี้

ประเภท
คุณต้องการติดต่ออย่างไร?
* เราเคารพความเป็นส่วนตัวของคุณ เมื่อคุณส่งข้อมูลการติดต่อของคุณ เราตกลงที่จะติดต่อคุณตามที่เราระบุไว้เท่านั้น นโยบายความเป็นส่วนตัว.