ڈیفالٹ کٹ
تلاش کریں۔
اس سرچ باکس کو بند کریں۔
  • گھر
  • آپریٹر تعاون
  • ہم سے رابطہ کریں۔
.play_icon_video{display:none;}
Owire ٹھوس F/UTP 305m باکس 1000Ft آؤٹ ڈور جیلی سے بھری Ftp Cat6 کیبل

اعلی معیار کی cat6 ایتھرنیٹ کیبلOEM مفت نمونہ FTP ایتھرنیٹ cat6 کیبل

1.The wire core adopts oxygen-free copper,which is fast,stable and high-speed transmission to meet your needs.
2.The core wire insulation later is made of Foam PE,which has strong flexibility and good wear resistance.
3.Eco-friendly PVC/LSZH Jacket,high-temperature resistance,long working life
مصنوعات کی خصوصیات:
ماڈل:
  • cat6 FTP

فیچر

Owire سالڈ آؤٹ ڈور لین کیبل Cat6 کیبل S/FTP 305m باکس

بنیادی وضاحتیں

قسم
Twisted pair
Conductor Material
Copper
Insulation Material
PE
Conductor section
4*2*0.56 mm
DC resistance
≤ 96 Om / km
Insulation resistance
≥ 5 GOm / km
The working volume of the pair in terms of 1m
≥ 56 pF
Tensile forces for mounting
≤ 50 N / mm2
Bending radius during installation
≥ 8x cable diameters
Bending radius after mounting
≥ 4x cable diameter
Steel wire
No
Foil
aluminium
Packing
305m/roll

اکثر پوچھے گئے سوالات

جی ہاں ہم 500 سے زائد عملے کے ساتھ حقیقی صنعت کار ہیں۔

ہاں، چھوٹا آرڈر دستیاب ہے۔ ہم اپنے صارفین کے نئے پروجیکٹ کی حمایت کرتے ہیں کیونکہ ہم جانتے ہیں کہ کاروبار ہمیشہ چھوٹے آرڈر سے ہوتا ہے۔

لین کیبل کے لیے 10 سال، فائبر آپٹک کیبل کے لیے 25 سال

عام طور پر 10-15 کام کے دنوں میں

لین کیبل، ہماری سالانہ پیداوار 500000*305m ہے۔
آؤٹ ڈور/انڈور فائبر آپٹک کیبل، ہماری سالانہ پیداوار 8,000,000 کلومیٹر ہے۔
FTTH/FTTX/FTTA کیبل، یہ 6,000,000 کلومیٹر فی سال ہے؛
پیچ کی ہڈی / Pigtails، یہ فی سال 12,400,000 ٹکڑے ٹکڑے ہے.

T/T، L/C، ویسٹرن یونین اور علی کی ادائیگی۔

جی ہاں ہم OEM اور ODM سروس فراہم کرتے ہیں۔ آپ ہمیں اپنی ڈرائنگ بھیج سکتے ہیں یا ہم اپنی پیشہ ورانہ حسب ضرورت ٹیم کے ذریعہ ڈیزائن بناتے ہیں۔

متعلقہ پروڈکٹ

The ST connectors are offered in MM or SM performances with PC polishing method. It is delivered with standard 2.0/3.0 mm cable or 0.9 mm fiber boots.
optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, manwell of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal. Sealing ring and air valve are required for closure, but that are not necessary for terminal box.
The single-mode or multi-mode fibers are positioned in a loose tube made of the high modulus plastic.The tube is filled with water-resistant filling compound.Over the tube,water-blocking material is applied to keep the cable watertight.After wrapping of steel braiding,the cable core is wrapped with a layer of corrugated steel tape.Finally,the cable is sheathed by PE sheath.

اگر آپ کو ہماری صنعت کے حل میں کوئی دلچسپی ہے۔

براہ مہربانی بلا جھجھک ہم سے رابطہ کریں اور ہم آپ کی خدمت کے لیے تیار ہیں۔
قسم

* ہم آپ کی رازداری کا احترام کرتے ہیں۔ جب آپ اپنی رابطہ کی معلومات جمع کراتے ہیں، تو ہم صرف ہمارے مطابق آپ سے رابطہ کرنے پر اتفاق کرتے ہیں۔ رازداری کی پالیسی.

ابھی رابطہ کریں۔

قسم
آپ کس طرح رابطہ کرنا چاہیں گے؟
* ہم آپ کی رازداری کا احترام کرتے ہیں۔ جب آپ اپنی رابطہ کی معلومات جمع کراتے ہیں، تو ہم صرف ہمارے مطابق آپ سے رابطہ کرنے پر اتفاق کرتے ہیں۔ رازداری کی پالیسی.