Default Kit
  • Home
  • Advantage
  • Contact Us

Four major problems and solutions that are often ignored in network wire wiring

The cable is one of the modern family decoration essential steps, but few people understand this, most people are put to the electrical network cabling can, more households will pay attention to home decoration and building materials, furniture, and in the network wiring many details in the decoration did not consider it no treatment. When we move into a new home, we can see that these problems will have a great impact on the use of the home network. Rewiring is very cumbersome, wasting money and wasting time. Some of the more common problems and solutions will be introduced below.

Problem one: the weak electric box does not reserve 220V power
The family circuit is divided into two main categories: strong and weak. The network, telephone line, TV closed circuit and so on are all weak current, and the weak box is used for the unified management and distribution of the family weak signal. The more common way of decoration is to find a common weak electric box. Actually, it is a plastic box. There is no 220V power reserved, just put these wires into it.
But with the broadband speed, fiber to the home, you need to put the cat in the light box and the light weak, the cat is needed for 220V power supply, 220V power supply if you want to add in the weak box, it is necessary to re opened from a strong box line, when renovation has been completed, wall paint has a good brush, wallpaper also go up, line is very troublesome. The simpler way is to power the light cat by row and row, but in this way, the row and wire are always exposed. It is obviously beautiful for many users.
It’s very simple to avoid such a problem, and there are two ways to solve it. One is to remind the electrician to set up a socket in the weak electric box, but all kinds of wire in the weak box are very disorderly, and the heat dissipation of the light cat may also be a problem. Another way is to buy an intelligent weak electric box, which is equipped with socket, cooling fan, light cat installation position, signal module and so on. It is not easy to appear wire disorder. This method is worth recommending.

Problem two: there is no reserved network interface under the TV set

The most important source of TV is closed-circuit television, so the reserved closed-circuit interface under TV is necessary, and the network interface is considered unnecessary by many users. And now watching TV has a new choice of IPTV. In recent years, China Unicom and telecom have put IPTV, mobile phone tariff and broadband into family meal. Many people are going to put IPTV in the bedroom, but IPTV transmits data through the network cable. The IPTV set-top box has to connect to the network interface, but there is no reserved network interface on the lower part of the TV set, and there is only above the bedside cupboard. With the same problem, after the completion of the renovation to re take the line is basically impossible, go open wire family environment is too beautiful.
        Question three: the quality of the net is not personally identified
Half a pack of popular style decoration, as the name suggests is a material such as ceramic tile etc. to be purchased by households, and the whole house wiring provided by the decoration company. In the early stage of negotiation, decoration companies often introduce the wire, but the decoration company will only tell you the brand and category of wire rod, and you don’t know what line actually used. If we do not identify the quality of the network before construction, we will probably encounter many problems, such as the loss of the network transmission speed and the damage of the network cable, which will affect the use of the home network.

Solution: now the family network gigabit network is best to use super six lines, six lines are on the wire marked CAT6 words, first look at the words are clear, and the external core insulation layer, will pull off the plastic bracket cross is transparent, is recycled materials etc.. In addition to looking at the words, but also to examine the material of the line core, this is the basis of the quality of the network. Can be said without the use of copper core products are bullying, in order to reduce the cost of some cable will use aluminum or even when iron wire core, an insulating layer and see the color as long as the Bakai magnet can use open. It is important to note that the 8 wire core should be removed and the core surface should be scraped to avoid the trap of “4 core copper, 4 core aluminum” and “aluminum core copper plating”. It is best to pick up the measured speed of the equipment after the wiring is finished, and the problem will be corrected immediately.

Problem four: layout network interface of Huxing Center
In daily life, you can’t get away from WiFi. Some users are able to make full use of WiFi signals for every place. When decorating, they choose to set up the network interface in the center of the whole room, so as to lay wireless router. It seems that the wireless router has the same distance to each room, and that the corresponding WiFi signal should not be wrong. In fact, the family environment is very complex, to each room obstacles are different, for example, is a barrier wall, so the wall is load-bearing wall or wall will affect the signal strength, even if is put in the apartment layout center position, signal of each room are not the same.
The solution is not to set up the network interface in the location of the Huxing center. If there is room in the family without signals, then it can solve the problem by bridging the wireless router or electric cat.

Share This Post

Contact Now

How would you like to be contacted?
* We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.