डिफ़ॉल्ट किट
खोजें
इस खोज बॉक्स को बंद करें.
  • घर
  • संचालक सहयोग
  • हमसे संपर्क करें
.play_icon_video{display:none;}
ADSS Single jacket sheath aramid yarn All Dielectric Self-Supporting Optical Fiber Cable Manufacturer

2-288 core ADSS Single jacket sheath aramid yarn All Dielectric Self-Supporting Optical Fiber Cable 2-288 core Manufacturer

We are a manufacturer of (ADSS)Single jacket sheath aramid yarn All Dielectric Self-Supporting Optical Fiber Cable. We supply fiber optic Cable in competitive cost and short lead time. Our factory approved ISO9001:2015, and we have UL, CE, FCC, ROHS, CCC, CPR certificates. Our Optical Fiber Cable quality is excellent, price is unbeatable.

विशेषता

ADSS Single jacket sheath aramid yarn All Dielectric Self-Supporting Optical Fiber Cable Manufacturer

मुख्य विशिष्टताएँ

ADSS Single jacket sheath aramid yarn All Dielectric Self-Supporting Optical Fiber Cable 2-288 core Manufacturer

Fiber core can be customized.

ADSS cable is loose tube stranded.The 250μm fibers are positioned into a loose tube made of high modulus plastics.The tubes are filled with a water-resistant filling compound.The tubes and possible fillers are stranded around a FRP (fiber Reinforced Plastic)as a non-metallic central strength member into a compact and circular cable core.After the cable core is filled with filling compound,it is can be covered with thin PE(polyethylene)inner sheath.After stranded layer of aramid yarns are applied over the cable core or inner sheath as strength member,the cable is sheathed by PE or AT(anti-tracking)material.

Characteristics

  1. Can be installed without shutting off the power
  2. Excellent AT performance.The maximum inductive at the operating point of AT sheath can reach 25kV
  3. Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
  4. Large span lengths and the largest span is over 1000m
  5. Good performance of tensile strength and temperature
  6. The design life span is over 30 years

Applications

Self-supporting aerial,especially applicable for installation on the same pole as 220V and below power transmission lines

Structure

Items

Descriptions

Optical fiber

श्रेणी

SM / MM

Counts

2-288

Color

Blue 、Orange、Green、Brown、Gray、White、Red、Black、Yellow、Violet、Pink、Aqua

Loose tube

Material

PBT

Color

Blue 、Orange、Green、Brown、Gray、White、Red、Black、Yellow、Violet、Pink、Aqua

Infilling

Fiber jelly

Center strength member

Material

FRP

Red ripcord

2*3000D(Red)

Water-blocking material

Water-blocking yarn and Water-blocking tape

Strength member

Aramid yarn

Outer sheath

Thickness(mm)

1.7±0.1

Material

PE

Color

Black

Optical fiber characteristics:

Single mode

श्रेणी

G652D

(1310nm/1550nm)

G657A1

(1310nm/1550nm)

G657A2

(1310nm/1550nm)

Attenuation

Typical

0.36dB/km/0.22dB/km

0.36dB/km/0.22dB/km

0.36dB/km/0.22dB/km

Max

0.4dB/km/0.3dB/km

0.4dB/km/0.3dB/km

0.4dB/km/0.3dB/km

Zero dispersion slope

≤0.091ps/km·nm2

≤0.092ps/km·nm2

≤0.092ps/km·nm2

Chromatic dispersion(1285-1340nm)

-3.5-3.5ps/(nm·km)

-3.5-3.5ps/(nm·km)

-3.5-3.5ps/(nm·km)

MFD(@1310nm)

9.2±0.4μm

8.8±0.4μm

8.8±0.4μm

Cut-off wavelength

≤1260nm

≤1260nm

≤1260nm

Min bending Radius

16mm

10mm

7.5mm

Cladding diameter

125±1.0μm

125±1.0μm

125±1.0μm

Multi mode

श्रेणी

62.5/125μm

(850nm/1300nm)

50/125μm

(850nm/1300nm)

BIOM3

(850nm/1300nm)

BIOM4

(850nm/1300nm)

Attenuation

Typical

3.0dB/km/1.0dB/km

3.0dB/km/1.0dB/km

3.0dB/km/1.0dB/km

3.0dB/km/1.0dB/km

Max

3.5dB/km/1.5dB/km

3.5dB/km/1.5dB/km

3.5dB/km/1.5dB/km

3.5dB/km/1.5dB/km

Bandwidth(MHz·km)

≥200/≥500

≥500/≥500

≥1500/≥500

≥3500/≥500

Effective mode bandwidth(MHz·km)

—-/—-

—-/—-

≥2000/—-

≥4700/—-

Min bending Radius(mm)

30

30

7.5

7.5

Cladding diameter

125±1.0μm

125±1.0μm

125±1.0μm

125±1.0μm

Mechanical and Environmental performance:

Items

Descriptions

MAT

1.2kN-4kN

Crush resistance

2200N/100mm

Spans

50-200m

Min bending radius(“D” is the diameter of the cable)

Static:12.5D

Dynamic:20D

Installation temperature

-20℃~﹢60℃

परिचालन तापमान

-40℃~﹢70℃

The mechanical properties of other optical fibers and optical cables shall meet the international standards of IEC60793 or IEC60794

अक्सर पूछे जाने वाले प्रश्न

हाँ. हम 500 से अधिक कर्मचारियों के साथ वास्तविक निर्माता हैं।

हां, छोटा ऑर्डर उपलब्ध है। हम अपने ग्राहकों के नए प्रोजेक्ट का समर्थन करते हैं क्योंकि हम जानते हैं कि व्यवसाय हमेशा छोटे ऑर्डर से होता है।

लैन केबल के लिए 10 वर्ष, फ़ाइबर ऑप्टिक केबल के लिए 25 वर्ष

आमतौर पर 10-15 कार्य दिवसों के भीतर

लैन केबल, हमारा वार्षिक उत्पादन 500000*305m है
आउटडोर/इनडोर फाइबर ऑप्टिक केबल, हमारा वार्षिक उत्पादन 8,000,000 किलोमीटर है;
FTTH/FTTX/FTTA केबल, यह प्रति वर्ष 6,000,000 KM है;
पैच कॉर्ड/पिगटेल, यह प्रति वर्ष 12,400,000 टुकड़े हैं।

टी/टी, एल/सी, वेस्टर्न यूनियन और अली भुगतान।

हाँ. हम OEM और ODM सेवा प्रदान करते हैं। आप हमें अपनी ड्राइंग भेज सकते हैं या हम अपनी पेशेवर अनुकूलित टीम द्वारा डिज़ाइन बनाते हैं।

संबंधित उत्पाद

We are a Armored LC SC FC ST APC UPC PATCH CORD Drop Cable Fiber Patch Cord Manufacturer. We supply fiber optic patch cord cables in competitive cost and short lead time. Our factory approved ISO9001:2015, and we have UL, CE, FCC, ROHS, CCC, CPR certificates. Our Optical Fiber Cable quality is excellent, price is unbeatable.
Non-Armored Uni-Tube optical cable with fibers placed in loose buffer tube.The cable core is protected with jelly to prevent water intrusion and migration, and coverwith a black polyethylene out jacket. Two embedded FRP or metallic wire provide desire tension

यदि आपको हमारे उद्योग समाधानों में कोई रुचि है

कृपया बेझिझक हमसे संपर्क करें और हम आपकी सेवा के लिए तैयार हैं
प्रकार

* हम आपकी निजता का सम्मान करते हैं। जब आप अपनी संपर्क जानकारी सबमिट करते हैं, तो हम केवल हमारे अनुसार ही आपसे संपर्क करने के लिए सहमत होते हैं गोपनीयता नीति.

अभी संपर्क करें

प्रकार
आप कैसे संपर्क किया जाना चाहेंगे?
* हम आपकी निजता का सम्मान करते हैं। जब आप अपनी संपर्क जानकारी सबमिट करते हैं, तो हम केवल हमारे अनुसार ही आपसे संपर्क करने के लिए सहमत होते हैं गोपनीयता नीति.