• ホーム
  • オペレーターの協力
  • お問い合わせ
.play_icon_video{display:none;}
ADSS Single jacket sheath aramid yarn All Dielectric Self-Supporting Optical Fiber Cable Manufacturer

2-288 core ADSS Single jacket sheath aramid yarn All Dielectric Self-Supporting Optical Fiber Cable 2-288 core Manufacturer

We are a manufacturer of (ADSS)Single jacket sheath aramid yarn All Dielectric Self-Supporting Optical Fiber Cable. We supply fiber optic Cable in competitive cost and short lead time. Our factory approved ISO9001:2015, and we have UL, CE, FCC, ROHS, CCC, CPR certificates. Our Optical Fiber Cable quality is excellent, price is unbeatable.

Feature

ADSS Single jacket sheath aramid yarn All Dielectric Self-Supporting Optical Fiber Cable Manufacturer

Core Specifications

ADSS Single jacket sheath aramid yarn All Dielectric Self-Supporting Optical Fiber Cable 2-288 core Manufacturer

Fiber core can be customized.

ADSS cable is loose tube stranded.The 250μm fibers are positioned into a loose tube made of high modulus plastics.The tubes are filled with a water-resistant filling compound.The tubes and possible fillers are stranded around a FRP (fiber Reinforced Plastic)as a non-metallic central strength member into a compact and circular cable core.After the cable core is filled with filling compound,it is can be covered with thin PE(polyethylene)inner sheath.After stranded layer of aramid yarns are applied over the cable core or inner sheath as strength member,the cable is sheathed by PE or AT(anti-tracking)material.

Characteristics

  1. Can be installed without shutting off the power
  2. Excellent AT performance.The maximum inductive at the operating point of AT sheath can reach 25kV
  3. Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
  4. Large span lengths and the largest span is over 1000m
  5. Good performance of tensile strength and temperature
  6. The design life span is over 30 years

Applications

Self-supporting aerial,especially applicable for installation on the same pole as 220V and below power transmission lines

Structure

Items

Descriptions

Optical fiber

カテゴリ

SM / MM

Counts

2-288

Color

Blue 、Orange、Green、Brown、Gray、White、Red、Black、Yellow、Violet、Pink、Aqua

Loose tube

Material

PBT

Color

Blue 、Orange、Green、Brown、Gray、White、Red、Black、Yellow、Violet、Pink、Aqua

Infilling

Fiber jelly

Center strength member

Material

FRP

Red ripcord

2*3000D(Red)

Water-blocking material

Water-blocking yarn and Water-blocking tape

Strength member

Aramid yarn

Outer sheath

Thickness(mm)

1.7±0.1

Material

PE

Color

Black

Optical fiber characteristics:

Single mode

カテゴリ

G652D

(1310nm/1550nm)

G657A1

(1310nm/1550nm)

G657A2

(1310nm/1550nm)

Attenuation

Typical

0.36dB/km/0.22dB/km

0.36dB/km/0.22dB/km

0.36dB/km/0.22dB/km

Max

0.4dB/km/0.3dB/km

0.4dB/km/0.3dB/km

0.4dB/km/0.3dB/km

Zero dispersion slope

≤0.091ps/km·nm2

≤0.092ps/km·nm2

≤0.092ps/km·nm2

Chromatic dispersion(1285-1340nm)

-3.5-3.5ps/(nm·km)

-3.5-3.5ps/(nm·km)

-3.5-3.5ps/(nm·km)

MFD(@1310nm)

9.2±0.4μm

8.8±0.4μm

8.8±0.4μm

Cut-off wavelength

≤1260nm

≤1260nm

≤1260nm

Min bending Radius

16mm

10mm

7.5mm

Cladding diameter

125±1.0μm

125±1.0μm

125±1.0μm

Multi mode

カテゴリ

62.5/125μm

(850nm/1300nm)

50/125μm

(850nm/1300nm)

BIOM3

(850nm/1300nm)

BIOM4

(850nm/1300nm)

Attenuation

Typical

3.0dB/km/1.0dB/km

3.0dB/km/1.0dB/km

3.0dB/km/1.0dB/km

3.0dB/km/1.0dB/km

Max

3.5dB/km/1.5dB/km

3.5dB/km/1.5dB/km

3.5dB/km/1.5dB/km

3.5dB/km/1.5dB/km

Bandwidth(MHz·km)

≥200/≥500

≥500/≥500

≥1500/≥500

≥3500/≥500

Effective mode bandwidth(MHz·km)

—-/—-

—-/—-

≥2000/—-

≥4700/—-

Min bending Radius(mm)

30

30

7.5

7.5

Cladding diameter

125±1.0μm

125±1.0μm

125±1.0μm

125±1.0μm

Mechanical and Environmental performance:

Items

Descriptions

MAT

1.2kN-4kN

Crush resistance

2200N/100mm

Spans

50-200m

Min bending radius(“D” is the diameter of the cable)

Static:12.5D

Dynamic:20D

Installation temperature

-20℃~﹢60℃

Operating temperature

-40℃~﹢70℃

The mechanical properties of other optical fibers and optical cables shall meet the international standards of IEC60793 or IEC60794

FAQ

Yes. We are the real manufacturer with more than 500 staff.

Yes, small order is available .We support new project of our customers as we know business is always from small order.

10 years for Lan cable , 25 years for fiber optic cable

ISO9001, SGS, UL, CPR, CE, RoHs

Usually within 10-15 working days

Lan Cable,our annual output is 500000*305m
Outdoor/Indoor Fiber Optic Cable, our annual output is 8,000,000 KM;
FTTH/FTTX/FTTA Cable, it is 6,000,000 KM per year;
Patch Cord/Pigtails, it is 12,400,000 Pieces per year.

T/T, L/C, Western Union and Ali pay.

Yes. We supply OEM&ODM service. You can send us your drawing or we make design by our professional customized team.

Related Product

The AAAC is used for overhead power transmission lines , especially the electric power augmentation of old transmission lines.
Fiber optic patch cord and pigtail are components to link the equipment and components in fiber optic network. Fiber optic patch cord sometimes is also calledfiber optic jumper or fiber optic adapter cables
ST to ST Simplex Fiber Optic Adapter (Singlemode, Metal, UPC, Silver, Without Flange) transfer connector FC ST SC LC adaptor OTDR Fiber Optic Connector For Optical Time Domain Reflectometer Fiber Adapter

If you have any interest in our Industry Solutions

please feel free to contact us & We are ready to serve you
種類

* 私たちはあなたのプライバシーを尊重します。あなたが連絡先情報を送信する場合、当社は当社の規定に従ってのみあなたに連絡することに同意します。 プライバシーポリシー.

今すぐ連絡する

種類
どのように連絡を希望されますか?
* 私たちはあなたのプライバシーを尊重します。あなたが連絡先情報を送信する場合、当社は当社の規定に従ってのみあなたに連絡することに同意します。 プライバシーポリシー.