Özellik
- Sizin için fiber kablo yapısını, fiber sayısını, uzunluğunu, paketini özelleştirebiliriz.
- fiyat rakipsiz
- Shortest delivery time for you, we produce 2000KM / day
- Can be installed without shutting off the power
- Excellent AT performance.The maximum inductive at the operating point of AT sheath can reach 25kV
- Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
- Good performance of tensile strength and temperature
- The design life span is over 30 years
Temel Özellikler
Fiber core can be customized.
ADSS cable is loose tube stranded.The 250μm fibers are positioned into a loose tube made of high modulus plastics.The tubes are filled with a water-resistant filling compound.The tubes and possible fillers are stranded around a FRP (fiber Reinforced Plastic)as a non-metallic central strength member into a compact and circular cable core.After the cable core is filled with filling compound,it is can be covered with thin PE(polyethylene)inner sheath.After stranded layer of aramid yarns are applied over the cable core or inner sheath as strength member,the cable is sheathed by PE or AT(anti-tracking)material.
Characteristics
- Can be installed without shutting off the power
- Excellent AT performance.The maximum inductive at the operating point of AT sheath can reach 25kV
- Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
- Large span lengths and the largest span is over 1000m
- Good performance of tensile strength and temperature
- The design life span is over 30 years
Applications
Self-supporting aerial,especially applicable for installation on the same pole as 220V and below power transmission lines
Structure
Items | Descriptions | |
Optical fiber | Kategori | SM / MM |
Counts | 2-288 | |
Renk | Blue 、Orange、Green、Brown、Gray、White、Red、Black、Yellow、Violet、Pink、Aqua | |
Loose tube | Material | PBT |
Renk | Blue 、Orange、Green、Brown、Gray、White、Red、Black、Yellow、Violet、Pink、Aqua | |
Infilling | Fiber jelly | |
Center strength member | Material | FRP |
Red ripcord | 2*3000D(Red) | |
Water-blocking material | Water-blocking yarn and Water-blocking tape | |
Strength member | Aramid yarn | |
Outer sheath | Thickness（mm） | 1.7±0.1 |
Material | PE | |
Renk | Black | |
Optical fiber characteristics：
Single mode
Kategori | G652D （1310nm/1550nm） | G657A1 （1310nm/1550nm） | G657A2 （1310nm/1550nm） | |
Attenuation | Typical | 0.36dB/km/0.22dB/km | 0.36dB/km/0.22dB/km | 0.36dB/km/0.22dB/km |
Max | 0.4dB/km/0.3dB/km | 0.4dB/km/0.3dB/km | 0.4dB/km/0.3dB/km | |
Zero dispersion slope | ≤0.091ps/km·nm2 | ≤0.092ps/km·nm2 | ≤0.092ps/km·nm2 | |
Chromatic dispersion（1285-1340nm） | -3.5-3.5ps/（nm·km） | -3.5-3.5ps/（nm·km） | -3.5-3.5ps/（nm·km） | |
MFD（@1310nm） | 9.2±0.4μm | 8.8±0.4μm | 8.8±0.4μm | |
Cut-off wavelength | ≤1260nm | ≤1260nm | ≤1260nm | |
Min bending Radius | 16mm | 10mm | 7.5mm | |
Cladding diameter | 125±1.0μm | 125±1.0μm | 125±1.0μm | |
Multi mode
Kategori | 62.5/125μm （850nm/1300nm） | 50/125μm （850nm/1300nm） | BIOM3 （850nm/1300nm） | BIOM4 （850nm/1300nm） | |
Attenuation | Typical | 3.0dB/km/1.0dB/km | 3.0dB/km/1.0dB/km | 3.0dB/km/1.0dB/km | 3.0dB/km/1.0dB/km |
Max | 3.5dB/km/1.5dB/km | 3.5dB/km/1.5dB/km | 3.5dB/km/1.5dB/km | 3.5dB/km/1.5dB/km | |
Bandwidth（MHz·km） | ≥200/≥500 | ≥500/≥500 | ≥1500/≥500 | ≥3500/≥500 | |
Effective mode bandwidth（MHz·km） | —-/—- | —-/—- | ≥2000/—- | ≥4700/—- | |
Min bending Radius（mm） | 30 | 30 | 7.5 | 7.5 | |
Cladding diameter | 125±1.0μm | 125±1.0μm | 125±1.0μm | 125±1.0μm | |
Mechanical and Environmental performance：
Items | Descriptions |
MAT | 1.2kN-4kN |
Crush resistance | 2200N/100mm |
Spans | 50-200m |
Min bending radius(“D” is the diameter of the cable) | Static：12.5D |
Dynamic：20D | |
Installation temperature | -20℃～﹢60℃ |
Operating temperature | -40℃～﹢70℃ |
The mechanical properties of other optical fibers and optical cables shall meet the international standards of IEC60793 or IEC60794 | |
SSS
Evet. 500'den fazla çalışanımızla gerçek üreticiyiz.
Evet, küçük siparişler mevcuttur. İşin her zaman küçük siparişlerden oluştuğunu bildiğimiz için müşterilerimizin yeni projelerini destekliyoruz.
Lan kablosu için 10 yıl, fiber optik kablo için 25 yıl
ISO9001, SGS, UL, CPR, CE, RoHs
Genellikle 10-15 iş günü içinde
Lan Kablosu, yıllık üretimimiz 500000*305m
Dış Mekan/İç Mekan Fiber Optik Kablo, yıllık üretimimiz 8.000.000 KM;
FTTH/FTTX/FTTA Kablosu, yılda 6.000.000 KM'dir;
Patch Cord/Pigtails, yılda 12.400.000 Adettir.
T/T, L/C, Western Union ve Ali ödeme yapar.
Evet. OEM ve ODM hizmeti veriyoruz. Çiziminizi bize gönderebilir veya profesyonel özelleştirilmiş ekibimiz tarafından tasarım yapabiliriz.
