Home > Fiber Optic Cable > For Outdoor > Function > Self-supporting > Page 3
Self-supporting
Single Sheath ADSS

Double Sheath ADSS


ADSS cable is loose tube stranded.The 250μm fibers are positioned into a loose tube made of high modulus plastics.The tubes are filled with a water-resistant filling compound.The tubes and possible fillers are stranded around a FRP (fiber Reinforced Plastic)as a non-metallic central strength member into a compact and circular cable core.After the cable core is filled with filling compound,it is can be covered with thin PE(polyethylene)inner sheath.After stranded layer of aramid yarns are applied over the cable core or inner sheath as strength member,the cable is sheathed by PE or AT(anti-tracking)material.
Characteristics
Applications
Self-supporting aerial,especially applicable for installation on the same pole as 220V and below power transmission lines
Figure-8 design,easy for self-supporting aerial installation,reducing installation costs
Good mechanical and temperature performances
Small size,light weight and soft, easy for installation
Applicable to short distance self-supporting aerial installation
FEATURES
·ASU OPTICAL FIBER CABLES
·4-12 cores colored fiber
·Non-metallic self-supporting membe
·Good-performance sheath materials
Features:
·Can be installed without shutting off the power.
·Excellent AT performance. The maximum inductive
·at the operating point of AT jacket can reach 25kV.
·Light weight and small diameter reducing the load
·caused by ice and wind and the load on towers and backprops.
·Large span lengths and the largest span is over 500m.
·Good performance of tensile strength and temperature.
·The design life span is over 30 years.
Feature:
·Full cross-section water-blocking structure and double-sided coated film steel belt longitudinal application ensure good water blocking and moisture resistance.
·Loose tube is filled with special grease to ensure good water blocking and moisture performance
·The phosphate wire center stiffening member is of high modulus and corrosion resistance.
·The figure 8 aerial-self supporting structure is featured with high tensile strength, easy overhead laying, and low cost of installation.
·More than 30 years of service life.
Features
·Small size, Low cost.
·Up to 24 fibers.
·Uni-tube gel-filled construction for superior fiber protection.
·Two parallel FRP wire and overall glass yarn to enhance tensile resistant.
·And protect cable from mechanical damage.
·Designed for use with inexpensive attachment hardware.
·Self-supported no messenger needed.
Product Features
·Optical cable with Aramid yarns reinforcement
·For customer connection
·Fully dielectric cable
·Last mile connection
·LAN and FTTX networks
·Distribution network
Structure:
Figure 8 non armoured fiber cable consists of :
·Stranded loose tube
·Steel wire strength member
·Core filler compound
·Fillers
·Phosphating or Galvanized steel wire
·PE sheath
Self-supporting